Connect SuperCat® capture alarm

Get control and an overview of your catch of mice and rats

With the Connect SuperCat add-on part, which can be combined with all SWISSINNO mouse and rat traps, it is now possible to check easily via smartphone or tablet whether a rodent has entered your traps.

Especially suitable for those traps that are difficult to get to, eg in the attic, in a cavity or crawl space, etc.

Simply place the device on the desired SWISINNO mouse or rat trap and it is ready for use. The status of the trap is sent directly to the app via Bluetooth. The app can be downloaded free of charge for Apple IOS and Android devices via the relevant App Store.

Benefits of digitally connected pest control:
- Check the status of the trap via a smart and simple app
- Compatible with all SWISINNO mouse and rat traps
- Free app for Apple IOS and Android smartphones
- Bluetooth connection technology
- Range up to 100 meters
- Uses two AAA batteries (not included)

Buy Connect SuperCat®. Check your trap's catch status. Free bluetooth based app. Works with SWISSINNO mouse and rat traps.

Range
Without obstacles such as walls etc. the signal can reach up to 100 meters. In the case of obstacles between walls/doors, the range is approx. 10 meters.

Setup Connect SuperCat® capture alarm

1.) Download and install the SWISSINNO app from the Apple or Android app store. Start the SWISSINNO App on your mobile device or tablet. Accept "Bluetooth" connections and optional messages.

2.) Open the battery compartment of the Connect SuperCat unit and insert 2 x AAA 1.5V batteries. Check that the polarity is correct (plus to plus, minus to minus).

3.) Hold the device close to your cell phone or ipad for initial activation. The device automatically connects to the SWISSINNO app. The app shows the device as "Connect SuperCat 1". The device is connected and fully functional. If desired, you can change the device name in the settings menu.

Now carefully place the device under the mouse or rat trap as shown in the images below. If the device activates during the process, simply reset it in the app.